Company News
  • personalised mothers day gifts My Kitchen Potholder
  • personalised mothers day gifts My New Favorite Noti
  • personalised mothers day gifts My Favorite Funny Pr
Contact Us

Email:

Tel:

personalised mothers day gifts Connect the Boxes Backpack Tutorial- Part 2 decorative pillow shams

Updated: 2020-03-05 22:53 Views: 86

Welcome to Part 2?of the Connect the Boxes Backpack Tutorial!?In Part 1?we made the outside of the back. In this post I’m going to show you how to make the lining and how to finish assembling the bag.

Step 1: Cut the following pieces from your lining fabric

personalized gifts for him

Two pieces 12″; x 10″;—front and back lining panels One piece 11″; x 10″;—back pocket lining Two pieces 12″; x 5″;—side panels One piece 5″; x 10″;—bottom panel

Step 2: Insert the zipper in the back lining panel. Cut the back lining panel into two pieces: 3″; x 10″; and 9″; x 10″;. To insert the zipper follow the directions from step 2 of part 1 of the backpack project which you’ll find here (add hyperlink)

Step 3: assemble the lining. With right sides together sew each side panel to the back panel. Open them out and sew the bottom panel to the bottom edge.

Sew the front panel to one of the side panels right sides together along one edge. Repeat for the other side.

Sew the front panel to the bottom panel but leave the center 6″; open for turning the bag in a later step.

Step 4: assemble the bag. Slip the outside of the backpack into the lining right sides together. Align the side panel seams and sew the lining to the back along the top edge.

Turn the bag right side out through the opening you left in the lining bottom panel. Sew the opening shut.

Press the bag and then topstitch along the top 1/4″; from the edge.

Step 5: Install the grommets. Install 2 grommets spaced equal distance apart along the top edge of each side panel. Place the grommets 1/2″; to 1″; from the top edge.

Install 4 grommets spaced equal distance apart along the top edge of the front panel. Place the grommets 1/2″; to 1″; from the top edge.

NOTE: if you would rather not use grommets on your bag, you can use buttonholes instead.

Step 6: install the drawstring. Cut the cording in half and make a large knot on one end of each piece. Starting at the grommet closest to the back of the bag on one sidepersonalised mothers day gifts, thread one of the cords starting from the outside of the bag through 4 of the grommets ending at the front of the front of the bag. The large knot that you tied will keep the cord from slipping through the grommet. Repeat for the other side. Feed the ends of the cord through your cord lock, trim the ends and tie a small knot.

The last step is to sew a button on the flap to cover the magnetic snap and your backpack is done!

I’m sure as you have unpacked your BERNINA sewing machine you’ve wondered what that little rectangular plastic tool is. You know the tool that has three sections?and folds out? In the picture above it’s the white rectangle right above the scissors. It’s called the Height Compensation tool, also known as a hump jumper. Read below to learn how to use the hump jumper tool!

Welcome! I am so excited to join 2 Bees in a Pod this week in their Come Home for Christmas series! I’m Brittany and over here I share easy crafts, decor, and occasionally simple recipes for those moms looking for an easier solution to running their homes.?

Today I added a new product category to the shop: Silk Scarves. Dark Floral, Dark Floral II Black Saturated and Dark Floral II Gray on Silk Charmeuse (130 cm square) are the first products in the collection.

Previous: personalised mothers day gifts Connect the Boxes Backpack Tutorial- Part 1 decorative pillow shams
Next: personalised mothers day gifts DIY Simple Swaddle Blanket customized gifts for mom